Changes

For maximum efficiency, you should only use these setups:

For maximum efficiency, you should only use these setups:

'''1 wheel drive, right angle''': This is used only on [[antweights]], to make a powerful HS. You can drive forward/backward using the right angle and turn left/right using the recoil of the spinner motor.

'''1 wheel drive, right angle''': This is used only on [[antweights]], to make a powerful [[HS]]. You can drive forward/backward using the right angle and turn left/right using the recoil of the spinner motor.

'''2WD, right angle''': Most lightweight classes use this setup. Decent speed. Used on MW's where a lot of the weight is put towards heavy weaponry. Ideal for MW horizontal spinner.

'''2WD, right angle''': Used widely by LW's and make for a decent drive.

Personally, most of my LW's use Z-tek drive, but it's just because i don't like slow bots, and i'm not forcing to use it. Most builders say this drive is enough on MW HS's and they could be right because i have little experience on HS's.  

'''2WD, Z-tek ''': Neat for speedy LW's and decent for MW, although not very fast.

'''2WD, Z-tek ''': Neat for speedy LW's and decent for MW, although not very fast.

Good for [[Popup]]s or [[Rammer]]s.

'''2WD, HP Z-tek''': Makes for very fast lightweights (you'll need practice your control while driving), neatly fast middleweights and average heavyweights. Use at least that on a HW if you want decent speed. Better than 4WD Z-tek because lighter for the same power.

'''2WD, HP Z-tek''': Makes for very fast lightweight rammers (you'll need practice your control while driving).

Most MW rammers and popups use this drive.

This is the average drive on a HW. Better than 4WD Z-tek drive because lighter for the same power.

'''3WD''': You're on crack, non-symmetrical and hard to work with in Stock. Although, a few Sit & Spins and Full Body Spinners have used a 3WD setup.

'''3WD''': As said by one of my idols, you're on crack.

This is extremely difficult to work with, often resulting on asymmetric bots that.

It reduces translating speed but increases turning speed. But I must say it is perfect for a MW [[SnS]].

'''4WD, HP Z-tek''': Very fast on a MW. That makes a nice drive for a HW.

'''4WD, HP Z-tek''': Very fast on a MW (use this on a SnS and a rammer if you want).  

If you want a good HW popup, use this. Also useful in HS killers.

'''6WD, HP Z-tek''': The best HW Rammers/Pistons use 6WD.

'''6WD, HP Z-tek''': The best drive train for HW Rammers. Several succesful [[Poker]]s use this too (not mine).

'''8WD, HP Z-tek''': OK, now this is beginning to be too much.

'''8WD, HP Z-tek or more''': Too much, even for a HW rammer. You need weapons on your bot, too...

 

'''10WD HP Z-tek or more''': You're insane.

== Wheels ==

== Wheels ==