Morse Code Breaker
Revision as of 06:33, 12 April 2009 by 65.182.246.176 (talk)
Morse Code Breaker was a Heavyweight Sawbot built by MetallikVyper, and used for RAW 1. Morse Code Breaker basically sucked. Sawbots generally don't fair too well in competitions, and MCB was no exception. Slow speed didn't help either. The only good part of Morse Code Breaker is that it utilized the new glitch, MCB Wedges. The glitch is named for Morse Code Breaker. The glitch is when you use the odd collision mesh of the skirt hinge as wedge, which becomes a better wedge than any other type of wedge. It is hard to utilize though, because the skirt hinge must be attached to your chassis.
| |
| Builder: | MetallikVyper |
|---|---|
| Weight class: | Heavyweight |
| Weapon: | 7 80cm sawblades |
| Weapon power: | 4 Perm 80 motors |
| Drive: | 2 NPC T-64 motors |
| Armor: | 3mm Steel |
| Awards: | None |
| Tournament wins: | Battle 2: Beats Skurge 2-1 |
| Tournament Losses: | Battle 1: Loses to good bye blue sky 3-0, Battle 3: Loses to obZen 3-0 |
| Trivia: | Morse Code Breaker shares a similar paintjob with Code Breaker, which was built also by MetallikVyper, but for Robot Rampage. |
