Morse Code Breaker
Jump to navigation
Jump to search
Morse Code Breaker was a Heavyweight Sawbot built by MetalikVyper, and used for RAW 1. Morse Code Breaker was one of the really average bots of all RAW 1, being much too slow for being a good sawbot. However, it was a wedgy bot because it used completely original wedges (now known as MCB Wedges), and that's why it won it's fight against Skurge. This type of wedge is when you use the odd collision mesh of the skirt hinge as wedge and basically revert the position of the wedge, with the black hinge going actually in your chassis rather than forward. A lot of people were also puzzled by MCB's internal steel sheets, that visibly served no purpose.
| |
| Builder: | MetalikVyper |
|---|---|
| Weight class: | Heavyweight |
| Weapon: | 7 80cm sawblades |
| Weapon power: | 4 Perm 80 motors |
| Drive: | 2 NPC T-64 motors |
| Armor: | 3mm Steel |
| Awards: | None |
| Tournament wins: | Battle 2: Beats Skurge 2-1 |
| Tournament Losses: | Battle 1: Loses to good bye blue sky 3-0, Battle 3: Loses to obZen 3-0 |
| Trivia: | Morse Code Breaker shares a similar paintjob with Code Breaker, which was built also by MetalikVyper, but for Robot Rampage. |
