Difference between revisions of "Wedge"

Latest revision as of 09:45, 6 June 2010

This page is a disambiguation page. There are other pages with similar names. You won't get confused if you come here.

The term "wedge" can mean two things - either the classic Wedge (robot type) as seen IRL, either various means to go under your opponent - see Wedge designs

@@ Line 1: / Line 1: @@
-A wedge is a non-damaging "weapon" that is used to get underneath the opposing robot. This is a major advantage to have, as most robots are helpless when you are underneath them. This then gives you the chance to [[Gut-rip]], or grind at you opponents vulnerable undersides. Most bot designs in both Stock and DSL should have basic wedges, while bots such as [[flipper]]s, [[Popup]]s, and other wedgebots should have more advanced wedges.
+{{disambig}}
+The term "wedge" can mean two things - either the classic [[Wedge (robot type)]] as seen IRL, either various means to go under your opponent - see [[Wedge designs]]
-==Wedge (bot type)==
-Real examples: Bad Attitude
-Game examples: Ronin, Lil'Dog
-Wedges are a simple bot design, and efficient if used well. It is basically a robot with a sloped front and a low ground clearance, for getting under other bots. Powerful drive train helps, too.
-'''PROS'''
--Fast
--Easy to build
--Can control another bot by taking away it's drive train
-'''CONS'''
--Very low damage for most of them
--Weaker when inverted
-==Wedge (robot feature)==
-A wedge shape are not everything in RA2 - again any other wedge bot, you must add some components that will give you the edge. This robot feature is called "wedge" too.
-== Stock ==
-There is basically only one type of good wedge for stock, and that is putting a small wedge (with an extender) on a burst motor (like if you were building a flipper) and lowering the burst motor to its proper location. You can however, have more complicated burst motor designs which will increase your wedginess.
-== DSL ==
-In DSL however, there are quite a few successful types of wedges.
-The most common are skirts mounted on skirt hinges. You can then rotate the hinge like a burst motor into the proper position.
-This kind of wedge is found almost all the DSL AI and is a common wedge design.
-Another type is a skirt mounted on a metal hinge. Metal hinges cannot be rotated like a burst motor, and must be wired to move. When lowered flat up against the ground, they are much more efficient than classic skirt hinge wedges, can also usually go under Mako-style wedges and are usually just a little less efficient than snapper wedges. Popularized by [[Urjak]]'s [[Flipper]] and [[RAW]] entry [[Lousy Launcher]], and also by several of [[Naryar]]'s wedged bots. Widely used on modern gut-rippers.
-There is also a third kind of wedge, called the Mako-style wedge or axle wedge. This kind of wedge has become popular in recent times. The flail wedge is made by putting a skirt on an axle mount. It is best to mount the axle onto a static support. Also, they're more efficient if flat against the ground. A weakness to this design however is that if you move to fast, the skirts may lift off the ground, giving your opponent a chance to hit. The axle wedge was developed by [[Jules]]. (See the robot [[Mako]] or [[Diarrhea of a Madman]] for a good representation of the flail wedge.)
-Heavier than the usual wedges, these are normally superior to hinged wedges, but tend to do poorly on fast collisions (and this is why [[Enfilad3]] and [[Hazardous Contraption]] could go under [[DOAM]] head-on).
-Another fourth kind are called "Morse Code Breaker" or "MCB" wedges, because they were first used by MetalikVyper in RAW with his bot, [[Morse Code Breaker]]. They use the odd collision mesh of the skirt hinge to make a wedge, but haven't proved anything yet. They are also used on [[Somebody]]'s GUMBA entry, Cutinator. These are the lighter wedges, but they are roughly not used since the awakening of the metal hinge.
-Probably the most effective wedge in DSL is still the snapper wedge, like in [[Stock]]. You simply attach your wedgy part to any burst motor (a sheet of any sort or a extender/small wedge combo). However, these are by far the heavier of the wedges. These wedges need a specific amount of pressure, and too much or too little can cause problems.
-It also seems that the small wedge component is a great choice for any wedge, but they're heavier, bigger and weaker than classic metal skirts for the same weight and size.
-[[Category:Robot Types]]

Difference between revisions of "Wedge"

Latest revision as of 09:45, 6 June 2010

Navigation menu

Search