Difference between revisions of "Morse Code Breaker"

From RA2Wiki
Jump to navigation Jump to search
(MCB wedges are NOT better than all other wedges.)
Line 38: Line 38:
 
|}
 
|}
  
'''Morse Code Breaker''' was a Heavyweight [[Sawbot]] built by [[MetallikVyper]], and used for RAW 1. Morse Code Breaker basically sucked. Sawbots generally don't fair too well in competitions, and MCB was no exception. Slow speed didn't help either. The only good part of Morse Code Breaker is that it utilized the new glitch, [[MCB Wedges]]. The glitch is named for Morse Code Breaker. The glitch is when you use the odd collision mesh of the skirt hinge as wedge, which becomes a better wedge than any other type of wedge. It is hard to utilize though, because the skirt hinge must be attached to your chassis.
+
'''Morse Code Breaker''' was a Heavyweight [[Sawbot]] built by [[MetallikVyper]], and used for RAW 1. Morse Code Breaker basically sucked. Sawbots generally don't fair too well in competitions, and MCB was no exception. Slow speed didn't help either. The only good part of Morse Code Breaker is that it utilized the new glitch, [[MCB Wedges]]. The glitch is named for Morse Code Breaker. The glitch is when you use the odd collision mesh of the skirt hinge as wedge. It is hard to utilize though, because the skirt hinge must be attached to your chassis.
 
[[Category:Robots from RAW]]
 
[[Category:Robots from RAW]]
 
[[Category:Robots from RAW 1]]
 
[[Category:Robots from RAW 1]]
 
[[Category:Bots in DSL]]
 
[[Category:Bots in DSL]]

Revision as of 07:24, 12 April 2009

Morse Code Breaker
Morse Code Breaker.jpg

Morse Code Breaker Pic 2.jpg

Builder: MetallikVyper
Weight class: Heavyweight
Weapon: 7 80cm sawblades
Weapon power: 4 Perm 80 motors
Drive: 2 NPC T-64 motors
Armor: 3mm Steel
Awards: None
Tournament wins: Battle 2: Beats Skurge 2-1
Tournament Losses: Battle 1: Loses to good bye blue sky 3-0, Battle 3: Loses to obZen 3-0
Trivia: Morse Code Breaker shares a similar paintjob with Code Breaker, which was built also by MetallikVyper, but for Robot Rampage.

Morse Code Breaker was a Heavyweight Sawbot built by MetallikVyper, and used for RAW 1. Morse Code Breaker basically sucked. Sawbots generally don't fair too well in competitions, and MCB was no exception. Slow speed didn't help either. The only good part of Morse Code Breaker is that it utilized the new glitch, MCB Wedges. The glitch is named for Morse Code Breaker. The glitch is when you use the odd collision mesh of the skirt hinge as wedge. It is hard to utilize though, because the skirt hinge must be attached to your chassis.